Products

• Fire Alarm System Equipment
  • Analogue Addressable Fire Alarm Control Panels
  • Analogue Addressable Detectors and Bases
  • Hush Button C-Tec Analogue Addressable
  • Fire Alarm Control Panels - Conventional
  • Conventional / Non-Addressable Detectors
  • Conventional Fire Alarm Manual Call Points
  • Fire Alarm Sounders and Beacons
  • Door Magnets / Retention Units
  • Rafiki Twinflex Two Wire Fire Alarm Systems
  • Radio Wireless Fire Alarm System Equipment
  • Stand Alone Fire Alarm Equipment
  • Fire Alarm Ancilliaries
  • Fire Alarm Testing Equipment
  • Beam Detector - Full Range of Beam Detectors
  • Domestic Fire Alarms
• Fire Extinguishers and Fire Blankets
• Sealed Lead Acid Batteries (SLA) Lead-Sealed
• Mobility Scooter Batteries
• Protective Workwear
• Petzl Head Torches and Head Lamps
• Fire Equipment Protection
• Safety Signs
• Emergency Lighting
• Power Supplies
• Sound Level Meters
• Sound Signs
• UPS Batteries
• Disabled Persons Toilet Alarms
• Disabled Refuge Systems
• Call Systems
• First Aid Kits & Burn Kits
• Infection Control Products
• Access Towers
• Access & Work Platforms
• Ladders & Accessories
• Induction Loops
• Odyssey Battery Range From Enersys
• Fire Door Closers and Furniture
• Emergency Exit Door Hardware
• Fire Safety & Risk Assessment Software
• Arrow Wayfinder Guidance System
• Cyclic Batteries Range

Conventional Fire Alarm Detector Range

Comprehensive range of Conventional / Non-Addressable Optical Smoke, Heat Detectors and Multi-criteria Smoke and Heat Detectors.

All devices are LPCB (Loss Prevention Council Approved) and designed for BS5839-1:2002 fire alarm systems.

Conventional Fire Alarm Detectors available from industry leading brands including System Sensor, Apollo, Notifier and Nittan.

Conventional Fire Alarm Detectors are a cost effective solution to providing a fully functioning fire alarm system in buildings. In conjuntion with conventional fire alarm panels and conventional fire alarm sounders a system fully compliant to BS5839 can be achieved. The detectors can be wired on a radial zone circuit direct from the main control panel. On activation each smoke detector with send a signal to the conventional fire alarm control panel to operate the sounder and relays incorporated on the system. Each conventional fire alarm detector in The Safety Centre's range incorporates a LED. This LED illuminates when the detector has detected either smoke or heat to aid in the location of the detection source.

Back to Home > Fire Alarm System Equipment