EDA-M350 Electro Detectors Millennium Radio Signal Repeater Panel For EDA-M200 Panel

The purpose of the EDA-M350 Electro Detectors Millennium Radio Signal Repeater Panel is to relay the radio signals around a site from the radio devices to the main control panels.  This will be neccessary when the radio fire alarm devices are out of the range of the main radio control panel.

 

The booster/repeater panel indicates only supply healthy and whether there is a fault relating to the panel. Its function is to control any local devices.

 

Should a fault or alarm condition occur from one of the local devices then the relevant information is sent around the network to control panels on the system. When the system is not in a fault or alarm condition the booster/repeater panels send data around the network indicating to the control panels how the system is performing.

 

This allows all system data to be available at the main control panel when an engineer arrives on site. Each repeater panel includes two relay contacts that can be configured to drive sounder circuits (0.5 amps each) or as auxillary relays (No or Nc).