Geze TS4000E Electro Magnetic Overhead Door Closer Size 2 - 4 Figure 1
Geze TS4000E Electro Magnetic Overhead Door Closer Size 2 - 4 Figure 1Independent test/release switch
Electrical installation The GEZE TS 4000 E has to be connected to a 24 V DC direct voltage supply to allow the door to be held open (We would recommend using the Geze Range of Power Supplies).Function Voltage applied to closer = door held open
No voltage applied or switched off = door not held open, door closes automatically
The door can be closed manually at any time regardless of wheather or not voltage is being applied.
Electrical data Operating voltage 24 V DC +/-10%
Connected load 45 mA
Max. permissible residual ripple 20%
Enclosure rating IP 43 (for interior use only)
Power supply cable, standard mounting
The power supply cable can be either surface-mounted or flush-mounted, see attached datasheet. Power is supplied from the terminal box to the closer via a cable with a threaded circular connector. To prevent the closer, terminal box, and cable from being damaged, the terminal box has to be mounted within the area shown on the illustration on the datasheet. Power cable supply, transom mounting The power supply cable to the closer is flush-mounted. The cables are connected to special terminals in the closer |
![]() |
Price: £159.95 (£187.94 inc VAT)
More Information:
Geze TS4000E Overhead Electro Magnetic Door Holder Datasheet
Back to Home > Fire Alarm System Equipment > Door Magnets / Retention Units > Overhead 24V dc Door Retainer / Closer



