Products

• Fire Alarm System Equipment
  • Analogue Addressable Fire Alarm Control Panels
  • Analogue Addressable Detectors and Bases
  • Hush Button C-Tec Analogue Addressable
  • Fire Alarm Control Panels - Conventional
  • Conventional / Non-Addressable Detectors
  • Conventional Fire Alarm Manual Call Points
  • Fire Alarm Sounders and Beacons
  • Door Magnets / Retention Units
  • Rafiki Twinflex Two Wire Fire Alarm Systems
  • Radio Wireless Fire Alarm System Equipment
  • Stand Alone Fire Alarm Equipment
  • Fire Alarm Ancilliaries
  • Fire Alarm Testing Equipment
  • Beam Detector - Full Range of Beam Detectors
  • Domestic Fire Alarms
• Fire Extinguishers and Fire Blankets
• Sealed Lead Acid Batteries (SLA) Lead-Sealed
• Mobility Scooter Batteries
• Protective Workwear
• Petzl Head Torches and Head Lamps
• Fire Equipment Protection
• Safety Signs
• Emergency Lighting
• Power Supplies
• Sound Level Meters
• Sound Signs
• UPS Batteries
• Disabled Persons Toilet Alarms
• Disabled Refuge Systems
• Call Systems
• First Aid Kits & Burn Kits
• Infection Control Products
• Access Towers
• Access & Work Platforms
• Ladders & Accessories
• Induction Loops
• Odyssey Battery Range From Enersys
• Fire Door Closers and Furniture
• Emergency Exit Door Hardware
• Fire Safety & Risk Assessment Software
• Arrow Wayfinder Guidance System
• Cyclic Batteries Range

Fire Alarm Sounders and Beacons.

- Conventional Fire Alarm Sounder Range

- LED Beacon Conventional Fire Alarm Range

- Fire Alarm Bell Range Conventional

- Industrial Fire Alarm Sounder & Beacon Range

- Specialist Sounder System Range

The Safety Centre can boast a full range of conventional / non addressable sounder units. These products are all manufactured by industry leading manufacturers using high quality designs and materials

The fire alarm sounders and beacons in this range are specifically designed for use on conventional fire alarm sounder circuits. Typically these types of fire alarm sounder and beacon circuits are run directly from a fire alarm control panel and have an resistor at the end of the circuit to comply with fire alarm sounder and beacon circuit monitoring regulations.

The Safety Centre also has a wide range of fire alarm beacon units within our range. These units can be used to comply with DDA regulations to warn deaf or hearing impaired persons that the fire alarm system has been operated. These fire alarm beacon units can also be used where the ambient room noise is too high to rely solely on fire alarm sounders. The fire alarm beacons can be used to give a visual indication that the fire alarm system is operative.

The Safety Centre also has a range of industrial fire alarm sounders and beacons manufactured by the UK's leading Industrial Fire Alarm Sounder and Beacon manufacturer Klaxon. These fire alarm sounders and beacons are specifically designed to be used in industrial and hazardous areas.

Key Benifits of Conventional Fire Alarm Sounders and Beacons.

- Can be used on most modern conventional fire alarm systems.

- Can be used to comply with BS5839 regulations.

- Most units in the range have a low current consumption.

Back to Home > Fire Alarm System Equipment