C-Tec BF375M 1A Regulated General Purpose Power Supply Unit

C-Tec BF375M specifications:

• output 24V 1A
• Three indicators:
  • mains on
  • battery/power supply fault
  • output triggered
• Two inputs:
  • trigger (requires a signal voltage of 5-27V d.c. 1mA)
  • hold off (requires a signal voltage of 5-27V d.c. 1mA)
• Fault monitoring function

The C-Tec BF375M is a general purpose mains to regulated 24V d.c. power supply unit complete with on-board relay. It has three indicators and two inputs. Both inputs can be used to control the power supply units internal relay to switch its output voltage on or off. This and the power supply units sophisticated fault monitoring function (battery faults, mains faults and ruptured fuse faults are all reported) makes the C-Tec BF375M one of the most versatile 1A power supplies available. 

Optional back-up batteries can be fitted to maintain the power supply units output and the units very low current consumption makes it ideal for large installations where multiple units can be connected to one system without compromising the battery stand-by time of the host panel.  Siting each power supply unit locally to its load can provide considerable cost savings on wiring, reduce the risk of voltage drop, increase flexibility and lessen the risk of total system failure.