Cygnus CYG2PIR Wireless Call Point Alarm With PIR

The Cygnus CYG2PIR fire call point alarm operates using a single battery pack and can be used externally. This radio alarm device has also been designed as a standalone alarm unit. These devices are normally situated around a site in prominent places on main escape routes, stairwells and on, or near fire points where they are visible in case of an emergency. This alarm has a 110 decibel sounder and an LED beacon for visual alerts. The call point is resettable and can be programmed with a sounder delay. Activating a call point will result in a site wide alert.

The new PIR intruder functionality is available on all Cygnus alarms. This additional functionality helps utilise fire, first aid alarms and detectors for intruder activations. This added functionality works with the CYG1-GSM/GPRS control panel that sends users an SMS text alert notification should an intrusion occur. Alerts can also be sent to a third-party monitoring station. The sensors are activated by using the menu settings on the control panel, and if an intruder is to pass the sensor in its activated mode will cause the local alarm to sound.

Cygnus CYG2PIR Features

• IP65 rated
• Noise level at 110dB
• Call point operated
• The CYG2PIR can be operated by using a single battery pack and it can be operated externally.
• Cygnus fire call point alarms are usually located in prominent areas on the work site where they can be easily accessed; for example, escape routes, emergency exits, stairwells, etc.
• These units should be located near fire points where they are visible in case of a fire or any other emergency.
• It has an LED beacon that provides visual alerts if there has been an emergency.
• The call point can be reset and you can also program it with a sounder delay.
• When the call point is activated during any emergency, a site-wide alert is sounded.
• Resettable call point
• Powered by an alkaline battery pack