Chat with us, powered by LiveChat

Notifier SDX-751EM Low Profile Analogue Addressable Optical Smoke Detector

SKU
SDX-751EM
£48.74 £58.49
  • Please Note : The SDX-751EM is now obsolete
  • The Notifier NFX-OPT-IV is a like for like replacement
  • Colour : Ivory
  • Base Plate Supplied Separately

Notifier SDX-751EM Low Profile Analogue Addressable Optical Smoke Detector

PLEASE NOTE : The Notifier SDX-751EM detector is now obsolete.  It has been superseeded by the Notifier NFX-OPT-IV detector.  Please see the related products below.

Notifier SDX-751EM Smoke Detector Key Benefits:

  • Sleek low profile design
  • Uses common sensor base (Notifier B501 - See Related Products) 
  • Analogue addressable communications
  • Stable communication technique with high noise immunity
  • Low standby current
  • Rotary DECADE 01 to 99 address switches
  • Remote LED output as standard
  • Dual LED design provides 360 degree viewing angle
  • Visible LED's blink every time the sensor is addressed (optional), and illuminate steady on alarm
  • Built-in functional test  switch activated by external magnet
  • Optional Relay, Isolator,  or Sounder bases
  • Tamper-resistant feature
  • LPCB (EN54 part 7) and VdS approved
 The Notifier SDX-751EM Smoke Detector is an analogue addressable, low profile Optical smoke sensor designed for use with NOTIFIER protocol fire alarm control panels.
 
This Notifier SDX-751EM analogue addressable smoke sensor enables the control panel to provide the operator with a pinpoint description of where the fire is located.

The control panel is capable of not only knowing the sensor’s location but exactly how much smoke is in the chamber of the Notifier SDX-751EM Smoke Detector.

The Notifier SDX-751EM Smoke Detector may be set for different sensitivity settings appropriate to the environment of its location.

The Notifier SDX-751EM analogue addressable Optical sensor's unique sensing chamber is designed with superior signal to noise ratio. The optical chamber is engineered to sense the presence of smoke produced by a wide range of combustion sources.
 
Please Note : This product is for purchase as a spare / replacement part for existing Notifier systems. Any extensions to existing systems or brand new systems MUST be commissioned by a Notifier ESD engineer in order to maintain the validity of the manufacturers warranty on the equipment. We can offer this service, please contact us for more details on our commissioning service.
Click Here To Enquire About This Product Now >>
Write Your Own Review
You're reviewing:Notifier SDX-751EM Low Profile Analogue Addressable Optical Smoke Detector
Your Rating

Our Brands

  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo
  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo