Chat with us, powered by LiveChat

Notifier Smoke & Heat Combined Detector Optiplex SDX-751TEM

SKU
SDX-751TEM
£69.11 £82.93
  • Please Note : The Notifier SDX-751TEM is now obsolete
  • The Notifier NFX-SMT2-IV is the like for like replacement
  • If you order this product you will receive the Notifier NFX-SMT2-IV
  • Colour : Ivory
  • Base Plates Supplied Separately

Notifier Smoke & Heat Combined Detector Optiplex SDX-751TEM - Replacement Product NFX-SMT2-IV

Notifier Smoke & Heat Combined Detector Optiplex SDX-751TEM.

PLEASE NOTE:  THIS PRODUCT IS NOW OBSOLETE AND HAS BEEN REPLACED BY THE NFX-SMT2-IV DETECTOR WHICH CAN BE USED AS A LIKE FOR LIKE REPLACEMENT. PLEASE SEE RELATED PRODUCTS BELOW.

Notifier SDX-751TEM Optiplex Smoke & Heat Detector Key Features:

  • Sleek low profile design
  • 5 Smoke sensitivity levels, two self optimising with heat only output
  • Analogue addressable  communications
  • Stable communication  technique with high noise immunity
  • Low standby current
  • Rotary DECADE 01 to 99 address switches
  • Remote LED output as standard
  • Dual LED design provides 360 degree viewing angle
  • Visible LED's blink every time the sensor is addressed (optional), and illuminate steady on alarm
  • Built-in functional test  switch activated by external magnet
  • Optional Relay, Isolator, or Sounder bases
  • EN54 part 7 and part 5  approved (VdS). CEA 4021 Multi Sensor Type C Approved

The Notifier SDX-751TEM Optiplex is an analogue addressable, low profile Optical and Thermal smoke sensor designed for use with NOTIFIER protocol fire alarm control panels.

Like any other analogue addressable sensor, the Notifier SDX-751TEM Optiplex Smoke & Heat Detector enables the control panel to provide the operator with a pinpoint description of where the fire is located. The control panel is capable of not only knowing the sensor’s location but exactly how much smoke is in the chamber of the sensor. The smoke and heat elements enable the sensor to respond quickly to a broad range of fire types whilst remaining unaffected by passing phenomena.

The Notifier SDX-751TEM Optiplex Multi Criteria Detector combines superior Optical smoke chamber design and Thermistor heat elements with a sophisticated sensor algorithm to provide the next generation of Multi-Criteria Sensors.

The Notifier SXD-751TEM Optiplex Detector uses advanced algorithms to continuously sample the environment and to adjust its sensitivity and alarm thresholds automatically. This provides optimum sensitivity within an unstable environment.

The Notifier SDX-751TEM Optiplex Smoke & Heat sensor, as well as utilising drift compensation, provides two maintenance levels. This enables maintenance to take place before the sensor reaches a critical maintenance level. The sensor may be configured to operate at different sensitivity settings, dependent on its location and control panel software, in a heat only mode.
 
Please Note : This product is for purchase as a spare / replacement part for existing Notifier systems. Any extensions to existing systems or brand new systems MUST be commissioned by a Notifier ESD engineer in order to maintain the validity of the manufacturers warranty on the equipment. We can offer this service, please contact us for more details on our commissioning service.
Click Here To Enquire About This Product Now >>
Write Your Own Review
You're reviewing:Notifier Smoke & Heat Combined Detector Optiplex SDX-751TEM
Your Rating

Our Brands

  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo
  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo