Chat with us, powered by LiveChat

System Sensor BRS-PC-I00 Addressable Sounder VAD Strobe Base

SKU
BRS-PC-I00
£50.54 £60.65
Enquire about this product
  • Manufacturer : System Sensor
  • Part Code : BRS-PC-I00
  • Addressable Sounder VAD Beacon Base
  • System Sensor Protocol

System Sensor BRS-PC-I00 Addressable Sounder VAD Base

The System Sensor BRS-PC-I00 is an addressable sounder VAD strobe base.

Approved to EN54-23 & EN54-17, it enables a complete, fully compliant and cost-effective fire alarm system by reducing installation and commissioning costs through fewer wiring points.

System Sensor’s EN54-23 approved Detector Base Strobe is a loop powered, high quality device designed for fast and simple installation and control. It is powered by the fire panel via the loop wiring. Operation and control of the device is via System Sensor Advanced or CLIP Protocol. The device is installed simply by a twist fit onto the universal B501AP base.

System Sensor BRS-PC-I00 Addressable Sounder VAD Strobe Base Features

  • Efficient light output and power consumption enables more devices on a loop
  • Single point of installation - saves time, cost & inventory
  • Red flash - industry preferred colour for evacuation
  • Single point of installation means fewer wiring points and simplified system maintenance
  • Modular design allows individual components to be replaced separately
  • Backwards compatibility with red flash, B501 base
  • Large cable access, rear or surface cable entry
  • Simple twist fit onto universal B501AP base
  • Rotary wheels & address tags for clear address indication
  • Loop continuity spring supports first fix installation
  • Independently approved to all required standards: Manufacturing: Construction Products Regulation (CPR). - Product performance: Approved to EN54-23, EN54-17
  • Environmental: RoHS, WEEE, REACH

System Sensor BRS-PC-I00 Addressable Sounder VAD Strobe Base Specification

  • Operating Temp: -10°C to 55°C
  • Relative Humidity: 93% ± 3%, non-condensing
  • Ingress protection: IP21C (with low profile B501AP base and IP Seal)
  • Colour: Pure white
  • Lens Colour: Clear
  • Weight net/ gross: 271g / 291g
  • Cable Terminal Size: 1.5 - 2.5mm2 max
  • Mounting Options: Low profile
  • EN 54-23 Coverage volume code - C-3-8.5
  • Installation height (X) - 3m
  • EN 54-23 Coverage (Y) Cylinder Ø = 8.5m
  • EN54-23 Coverage Volume 170 m3
  • Flash rate - 0.5 Hz
  • Operating volateg range - 15 to 29V
  • Flash Colour - Red
  • Mounting - Ceiling Mount: C-Category
Write Your Own Review
You're reviewing:System Sensor BRS-PC-I00 Addressable Sounder VAD Strobe Base
Your Rating

Our Brands

  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo
  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo