Chat with us, powered by LiveChat
We're still OPEN for online orders and delivering all our products safely and quickly.

System Sensor WCP5A-RP02SG-01 Waterproof Call Point with Isolator IP67

System Sensor WCP5A-RP02SG-01 Waterproof Call Point with Isolator IP67

Sku: WCP5A-RP02SG-01

£129.95 (ex VAT) £155.94 (inc VAT)

* Required Fields

£129.95 (ex VAT) £155.94 (inc VAT)
  • Manufacturer : System Sensor
  • Part Number : WCP5A-RP02SG-01
  • Weatherproof Addressable Call Point
  • System Sensor Protocol
  • IP67 Rated
  • Supplied with Glass Element & Test / Reset Key

System Sensor WCP5A-RP02-SG01 Waterproof Manual Call Point IP67 Fire Alarm Analogue Addressable


  • Unique 'plug and play' installation concept
  • Part Number : WCP5A-RP02SG-01
  • Resettable plastic element option available (not included)
  • System Sensor Analogue Addressable Protocol Communications
  • Fully compliant with EN54 Part 11
  • Backward Compatible
  • Enhanced Aesthetics
  • Integral LED
  • Integral Isolator
  • IP67 Rated
This System Sensor Waterproof Manual Call Point Break Glass Unit WCP5A-RP02-SG01 is specifically designed to be used on System Sensor Protocol Fire Alarm Control Panels.  The unit is designed to give a manual signal to the System Sensor Fire Alarm Control panel which will operate the fire alarm system. This unit is IP67 rated.
This unit features an integral loop isolator built into the device.
These units are based on the industry standard KAC manual call point.  They have been designed specifically to give installation efficiency, flexibility and compliance with the latest standards.
The System Sensor Manal Call Point Break Glass WCP5A-RP02-SG01 features an Integral LED.  This LED will illuminate once the break glass unit has been operated.  This feature allows easy identification as to which System Sensor Manual Call Point Break Glass has been operated.
The System Sensor Manual Call Point Break Glass Unit features a unique 'plug and play' concept that is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link to provide continuity for testing. During the commissioning phase, the links are removed and the terminal block is simply inserted into the connector at the back of the unit. No re-termination is required.
The System Sensor Manual Call Point Break Glass WCP5A-RP02-SG01 uses one of 99 possible addresses which is simply 'dialled in' using the two rotary decade switches on the rear of the unit.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

Click Here To Enquire About This Product Now >>


Please wait...

Continue shopping
View cart & checkout
Continue shopping
View cart & checkout