Chat with us, powered by LiveChat

Ziton ZCR452 Conventional to Wireless Interface Module

SKU
ZCR452
£141.50 £169.80
  • Manufacturer : Ziton
  • Part Code : ZCR452
  • Conventional To Wireless Interface Module
  • Operating Frequency : 868Mhz

Ziton ZCR452 Conventional to Wireless Interface

The Ziton ZCR452 unit is designed to allow a conventional fire alarm panel to be connected with Ziton wireless fire system equipment.

This unit hard wires to a conventional detection zone providing a 2 way radio communication with a Ziton ZR868-C conventional wireless communicator unit, which communicate with the wireless devices.

The Ziton ZCR452 is an interface between a conventional fire detection zone and a range of wireless, 868 MHz field devices. It provides a method of interfacing a conventional system with a zone of wireless field devices in areas where the installation of system wiring is not an option.

The ZCR452 allows for any compatible conventional fire detection zone to be connected directly to the unit. The ZCR452 in turn provides fire and fault notifications from the wireless field devices to these conventional circuits. In addition any conventional notification circuit may also be wired to the ZCR452, allowing wireless notification devices to be controlled from the conventional notification controller in a similar way to any hardwired conventional notification device.

From the conventional interfaces the ZCR452 relays all signals wirelessly to a ZCR868-C wireless cluster communicator that in turn controls a complete zone of wireless detectors, remote indicators, manual call points, input/output units and/or audio, visual or audio visual notification devices. Any abnormalities from the wireless field devices such as faults, alarms, device removal, low battery etc. are relayed back from the cluster communicator to the ZCR452 where they are converted into basic conventional signals that are interpreted by the conventional interface and relayed and displayed on the fire system.

Please Note : This product is designed to be used in conjunction with the Ziton ZCR868-C unit.

Click Here To Enquire About This Product Now >>
Write Your Own Review
You're reviewing:Ziton ZCR452 Conventional to Wireless Interface Module
Your Rating

Our Brands

  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo
  • Apollo Logo
  • Ctec Logo
  • Electro Detectors Logo
  • Notifier Logo
  • STI Logo
  • Yuasa Logo