Electro Detectors Battery Guide

Electro Detectors (EDA) Wireless Fire Alarm System devices all contain batteries as a power source.  This is a short guide to show which electro detectors batteries should be used in which devices.

EDA-Q690 2 Cell Lithium Battery Assembly

EDA-Q690 Electro Detectors Zerio Plus Battery Assembly

The EDA-Q690 battery pack is designed specifically to be used with the Electro Detectors range of Zerio Plus devices.  The EDA-Q690 battery assembly is for use with the following Electro Detectors (EDA) Devices:-

  • EDA-R5000 - Zerio Plus Optical Smoke Detector
  • EDA-R6000 - Zerio Plus Optical Smoke Detector & Sounder
  • EDA-R6030 - Zerio Plus Optical Smoke Detector Sounder & Beacon
  • EDA-D5000 - Zerio Plus Heat Detector
  • EDA-D6000 - Zerio Plus Heat Detector & Sounder
  • EDA-D6030 - Zerio Plus Heat Detector Sounder & Beacon
  • EDA-C5000 - Zerio Plus Call Point
  • EDA-A6000 - Zerio Plus Wall Sounder
  • EDA-A6030 - Zerio Plus Wall Sounder Beacon
  • EDA-A6060 - Zerio Plus Wall Beacon
  • EDA-T6080 - Zerio Plus Output Actuator
  • EDA-T5000 - Zerio Plus Transmitter
  • EDA-T5100 - Zerio Plus Silence Button

EDA-Q660 2 Cell Lithium Battery Assembly

EDA-Q660 2 Cell Lithium Battery Pack for Electro Detectors Millenium Detectors

The EDA-Q660 battery pack is designed specifically to be used with the Electro Detectors range of Zerio and Millennium Detectors.  The EDA-Q660 battery assembly is for use with the following Electro Detectors (EDA) Devices:-

  • EDA-J300 - Millennium Ionisation Smoke Detector
  • EDA-R300 - Millennium Optical Smoke Detector
  • EDA-D300 - Millennium Rate of Rise Heat Detector
  • EDA-S300 - Millennium Fixed Point Heat Detector
  • EDA-J500 - Millennium Analogue Ionisation Smoke Detector
  • EDA-R500 - Millennium Analogue Optical Smoke Detector
  • EDA-S500 - Millennium Analogue Heat Detector
  • EDA-R1000 - Zerio Optical Smoke Detector
  • EDA-D1000 - Zerio Heat Detector

EDA-Q670 2 Cell Lithium Battery Assembly

EDA-Q670 2 Cell Lithium Battery Pack for EDA Combined Detector Sounders and Call Point Units

The Electro Detectors (EDA) EDA-Q670 2 cell lithium battery assembly is specifically designed to be used with the Electro Detectors Zerio & Millennium Range of Combined Detector Sounders, New Type Manual Call Points and New Type Transmitter units.  The combined detector sounder units require 2 sets of EDA-Q670's per device.  The EDA-Q670 battery assembly is for use with the following Electro Detectors (EDA) devices:-

  • EDA-J400 - Millennium Combined Sounder and Ionisation Smoke Detector
  • EDA-R400 - Millennium Combined Sounder and Optical Smoke Detector
  • EDA-D400 - Millennium Combined Sounder and Rate of Rise Heat Detector
  • EDA-S400 - Millennium Combined Sounder and Fixed Point Heat Detector
  • EDA-C300 - Millennium Manual Call Point
  • EDA-T300 - Millennium Radio Transmitter
  • EDA-R2000 - Zerio Radio Optical Smoke Detector and Combined Sounder
  • EDA-D2000 - Zerio Radio Heat Detector with Combined Sounder
  • EDA-C1000 - Zerio Radio Call Point / Break Glass Unit
  • EDA-T1000 - Zerio Transmitter Unit

Please Note:  The colour of the cells on the picture above may vary.

EDA-Q620 Main Sounder Battery Lithium Assembly

EDA-Q620 Main Sounder Battery for Electro Detector Millennium Sounder & Actuator Units

The Electro Detectors (EDA) EDA-Q620 Lithium Battery assembly is specifically designed to be used as the primary battery in the Electro Detectors (EDA) Zerio and Millennium range of Wall Mounted Sounders, Wall Mounted Beacons, Wall Mounted Sounder Beacons and Actuators.  The EDA-Q620 Lithium Battery Assembly is for use with the following devices:-

  • EDA-A2000 - Zerio Wall Mounted Sounder (White)
  • EDA-A200 - Millennium Wall Mounted Sounder (White)
  • EDA-A205 - Millennium Wall Mounted Sounder (Red)
  • EDA-A250 - Millennium Wall Mounted Actuator with Transistor Switch
  • EDA-A270 - Millennium Wall Mounted Staff Alert Sounder with Visual Indicator
  • EDA-A280 - Millennium Wall Mounted Actuator with NO/NC Contacts
  • EDA-A281 - Millennium Wall Mounted Sounder with NO/NC Contacts & Input
  • EDA-A2000 - Zerio Radio Wall Mounted Sounder
  • EDA-A2050 - Zerio Radio Actuator / Output Interface Unit
  • EDA-A2080 - Zerio Radio Clean Contact Output and Door Release Unit
  • EDA-A2060 - Zerio Radio Strobe Unit

Please Note:  The colour of the cell on the picture above may vary.

EDA-Q630 Sounder Standby Lithium Battery Assembly

EDA-Q630 Standy-By Battery for Electro Detectors Millennium Sounder & Actuator Units

The Electro Detectors (EDA) EDA-Q630 Lithium Battery assembly is specifically designed to be used as the secondary / standby battery in the Electro Detectors (EDA) Zerio and Millennium range of Wall Mounted Sounders, Wall Mounted Beacons, Wall Mounted Sounder Beacons and Actuators.  The EDA-Q630 Lithium Battery Assembly is for use with the following devices:-

  • EDA-A2000 - Zerio Wall Mounted Sounder (White)
  • EDA-A200 - Millennium Wall Mounted Sounder (White)
  • EDA-A205 - Millennium Wall Mounted Sounder (Red)
  • EDA-A250 - Millennium Wall Mounted Actuator with Transistor Switch
  • EDA-A270 - Millennium Wall Mounted Staff Alert Sounder with Visual Indicator
  • EDA-A280 - Millennium Wall Mounted Actuator with NO/NC Contacts
  • EDA-A281 - Millennium Wall Mounted Sounder with NO/NC Contacts & Input
  • EDA-A2000 - Zerio Radio Wall Mounted Sounder
  • EDA-A2050 - Zerio Radio Actuator / Output Interface Unit
  • EDA-A2080 - Zerio Radio Clean Contact Output and Door Release Unit
  • EDA-A2060 - Zerio Radio Strobe Unit

Please Note:  The colour of the cell on the picture above may vary.

EDA-Q650 2 Cell Lithium Battery Assembly

EDA-Q650 Old Type Manual Call Point Battery Assembly For Electro Detectors Manual Call Points

The Electro Detectors (EDA) EDA-Q650 2 Cell Lithium Battery Assembly is specifically designed for use with old type Electro Detectors Call Points and Transmitters where the battery assembly is required to be screwed into the unit.

Electro Detectors (EDA) EDA-Q610 4 Cell Lithium Battery Assembly

Electro Detectors EDA Batteries Assembly for Pre-Millennium Detectors - EDA-Q610

The Electro Detectors EDA-Q610 is a 4 Cell Lithium Battery assembly specifically designed to be used with the A-Series detectors where the battery assembly is required to be screwed into the detector.  The EDA-Q610 4 Cell Lithium Battery assembly is for use with the following devices:-

  • EDA-J200 Radio Ionisation Smoke Detector
  • EDA-R200 Radio Optical Smoke Detector
  • EDA-S200 Radio Heat Detector
  • EDA-D200 Radio Heat Detector

Please Note:  The colour of the cells on the picture above may vary.

Electro Detectors (EDA) EDA-Q640 Ultralife PP3 Lithium 9V Battery

EDA-Q640 Electro Detectors Ultralife PP3 Lithium 9V Battery Pack for EDA A-Series Detectors

The Electro Detectors (EDA) EDA-Q640 is a 9V PP3 Lithium Battery specifically designed for use in the Electro Detectors (EDA) A-Series detectors and call points.  2 Cells are required per detector and call point.

For more information please click the following link:-  EDA Batteries. View our full range of wireless fire alarm systems.