Dycon D-1460-P 12V 10A Power Supply With Upto 9 DC Outputs- PCB Only

Specially designed for larger system applications, the Dycon D1460-series features an advanced technology 10A switchedmode powersupplymodule designedto be used singly orin pairs andfitted into a range of housings or control. Featuring Dycon’s unique protective technology with intelligent and capacitive load switching surge protection and snubbing and the switched outputs are designed for highly inductive loads (door strikes and locks) removing the chance of an ‘electricalspike’ or transient causing a door to remain closed or open, a frequent cause of personnel delays and expensive engineer call outs.

Each module has 9 x switched and programmable 12VDC x 1A outputs which can be divided into two separate switched groups, an ‘alwayson’ group and individual outputs, switching can be selected by jumper link. Using other links, two or three Individual outputs can be connected in parallel to create2A or 3A high current outputsmaking the D1460 a highly flexible, single, power solution. Master/Slave ganging allows the connection of 2 x D1460’s together to provide a formidable 20A solution. Additionally, 3 x normally closed (NC) volt-free ‘fault’ outputs are provided for remotely signalling the status and serviceability of units. These fault outputs can be used to indicate problems either locally or remotely via a suitable signalling device.