Tyco Zettler WT300 Walk Test Controller - 517.300.021
- Manufacturer : Tyco Zettler
- Part Code : WT300 (517.300.021)
- Walk Test Controller
- Used for self-test features of the FV300 detectors
Tyco Zettler WT300 Walk Test Controller
The Zettler WT300 Walk-Test Tool is a hand-held unit for remotely activating the self-test features of the FV300 detectors. The unit is battery powered and can activate the alarm test, window test or reset the FV300 detector from a range of over 6m by using an infra-red link.
The WT300 can be used in hazardous areas. It is housed in a plastic enclosure with an anti-static coating. To prevent accidental operation, the WT300 needs to be unlocked using the keypad before a command can be sent. It is an intrinsically safe unit and has been approved to use Duracell Procell MN1500 batteries only. No other types may be used in a hazardous area.
In a safe area, undo the two screws and remove the cover from the battery compartment. Remove the old batteries. Fit a pair of new batteries noting polarity as shown by markings in the bottom of the compartment. Refit the cover and secure with the screws. Dispose of old batteries considerately.
Key Features
- Battery powered using AA cells
- Used for remotely activating the self-test features of FV300 detectors
