Apollo RW1000-400APO REACH Wireless Heat Detector

The Apollo RW1000-400APO is a wireless analogue addressable heat detector that can be configured as either rate-of-rise (A1R) or high temperature (BS) classification as specified in the EN 54-5. Multiple EN 54-5 classes (either A1R and BS) can be configured via the Loop-Interface during setup.

• Twin alarm, bi-colour LEDs for 360° visibility
• Programmable for rate-of-rise (A1R) or static temperature (BS)
• Bi-directional wireless communication
• Dual channel redundancy

Operating Principles

The REACH Wireless Heat Detector is flexible – offering either static (BS) or rate-of-rise (A1R) functionality.

Status LED

It also includes a 360° LED indicator which illuminates red or green to indicate status conditions.

Device Addressing

Device addressing is handled by the REACH Wireless Loop-Interface device (RW1700-030APO).

Devices are soft-addressed automatically when pairing with the Loop Interface and can be changed manually. Hard-addressing using Apollo XPERT cards are not supported.

Communication

Apollo REACH Wireless Devices use ‘radio-frequency’ wireless communication to connect to the Loop-Interface.

The Loop-Interface (RW1700-030APO) translates the wireless communication into wired Apollo protocol communication, with each device addressable individually by the fire panel.