Apollo RW1700-051APO Reach Wireless Input Interface Module

The Apollo RW1700-051APO REACH Wireless Input Module is a wireless analogue addressable interface with single fully monitored input circuit which allows simple integration of third-party equipment with the fire system.

• Input circuits are fully supervised for alarm and fault conditions
• Bi-directional wireless communication
• Dual channel redundancy

Operating Principles

The Apollo RW1700-051APO REACH Wireless Input module works on an ON/OFF logic and does not rely on any special and/ or intelligent communication protocol for its operation (i.e conventional call-points).

Status LED

When one or more faults are present in the system they are shown on the LCD and the fault LED is switched on yellow.  LCD is ON only when the tamper switch is not activated (cover open) regardless of the configuration of the translator tamper fault.

Device Addressing

Device addressing is handled by the REACH Wireless Loop-Interface device (RW1700-030APO).
Devices are soft-addressed automatically when pairing with the Loop Interface and can be changed manually.

Communication

Apollo REACH Wireless Devices use ‘radio-frequency’ wireless communication to connect to the Loop-Interface. The Loop-Interface (RW1700-030APO) translates the wireless communication into wired Apollo protocol communication, with each device addressable individually by the fire panel.